Revell 1/72 Razor Crest Lighting Kit
Product Code: SW-33
0
£45.00 inc. tax
Description
Revell 1/72 Razor Crest Lighting Kit
Designed for the Revell 1/72 version of the Mandalorian's ship, the Razor Crest this lighting kit is fully wired so no soldering, The kit has plugs and sockets to make it easier to install.
The lighting kit consists of:
Control Board
2 x Engine looms with position lights & engine LED
Cockpit backlight
Cockpit console loom with white, green and red LEDs with 0.52mm fibre guides
Front running lights
2 x resin printed engine LED bell
clear plastic to diffuse engine LEDs
Aluminium tape to line engine diffusers
Full set of instructions
The kit has been designed to work with either the original kit parts or the aftermarket parts from 308 Bits on Shapeways. Note that you don't need the engine diffusers that 308 Bits makes.
Some alterations are needed to the original kit and these are described in the instructions.
The kit is designed to work on a 5V DC supply (Not supplied), this can be either 5V PSU or 3 x AA batteries.
Designed for the Revell 1/72 version of the Mandalorian's ship, the Razor Crest this lighting kit is fully wired so no soldering, The kit has plugs and sockets to make it easier to install.
The lighting kit consists of:
Control Board
2 x Engine looms with position lights & engine LED
Cockpit backlight
Cockpit console loom with white, green and red LEDs with 0.52mm fibre guides
Front running lights
2 x resin printed engine LED bell
clear plastic to diffuse engine LEDs
Aluminium tape to line engine diffusers
Full set of instructions
The kit has been designed to work with either the original kit parts or the aftermarket parts from 308 Bits on Shapeways. Note that you don't need the engine diffusers that 308 Bits makes.
Some alterations are needed to the original kit and these are described in the instructions.
The kit is designed to work on a 5V DC supply (Not supplied), this can be either 5V PSU or 3 x AA batteries.
