12V General Starship Board
Product Code: sKSpMgn
1
£20.00 inc. tax
Description
12V General Starship Control Board
This board is a one stop board for all your Starship lighting needs.
12V DC supply into the board which then gives you the following outputs:
12V DC Constant
5V DC Constant
1 sec on 1 sec off Navigation Flash
Fade up/fade down Pulse
Strobe Flash
Double Strobe Flash (as JJPrise)
All outputs are connected to terminals for ease of wiring. All functioning outputs are 5V.
Board dimensions are 50mm (L) x 40mm (W) x 20mm (H)
The board will also work with a 9V PP3 battery, please note that this would give 9V constant suplies on the board and not 12V.
The board can be supplied with a Flicker output instead of the pulse, just put a note on the order and we will change it before shipping.
Please note that this is a control board only, you will need to add LEDS, resistors and wires.
This board is a one stop board for all your Starship lighting needs.
12V DC supply into the board which then gives you the following outputs:
12V DC Constant
5V DC Constant
1 sec on 1 sec off Navigation Flash
Fade up/fade down Pulse
Strobe Flash
Double Strobe Flash (as JJPrise)
All outputs are connected to terminals for ease of wiring. All functioning outputs are 5V.
Board dimensions are 50mm (L) x 40mm (W) x 20mm (H)
The board will also work with a 9V PP3 battery, please note that this would give 9V constant suplies on the board and not 12V.
The board can be supplied with a Flicker output instead of the pulse, just put a note on the order and we will change it before shipping.
Please note that this is a control board only, you will need to add LEDS, resistors and wires.
